Microneedling Before and After

If you search Instagram or Google for microneedling before and after photos, you will likely see some pretty alarming images. This is because microneedling involves puncturing the skin with needles.

You should only get this procedure done in a doctor’s office or by an aesthetician who is licensed. This is because the device has to be sterilized and can cause skin damage if it is not used correctly. Contact Microneedling San Diego now!

Microneedling involves puncturing the skin with tiny needles to stimulate your body’s natural healing response and produce new collagen. It helps reduce the appearance of pore size, stretch marks, and fine lines and wrinkles and tightens skin tone and texture. It’s also used to help treat acne scarring, improve uneven skin tone, and reduce rosacea flares. It can even be used to treat hair loss in the scalp by promoting growth of healthy hair follicles.

The needles used for the procedure are very short, usually up to 0.5 mm in length. This helps prevent damage to the surrounding tissues and allows for the penetration of the needles deeper into the skin without causing bleeding or other adverse effects.

Your doctor may apply a numbing cream before the treatment to prevent pain. You should let them know if you have any allergies or sensitivities to numbing creams before your visit. You should also tell your doctor if you have a bleeding disorder or take blood thinners. Your doctor will give you instructions on how to care for your skin after the procedure.

Generally, dermatologists are the best option for getting a microneedling treatment. However, aestheticians and other practitioners who have received specialized training can also perform the procedure. When choosing a practitioner, always check on their credentials and make sure they sterilize all equipment before and after each use. Avoid do-it-yourself kits that you can buy in beauty supply stores because they often don’t have the proper sterilization methods or experience to conduct a safe procedure.

A treatment typically lasts about 10-20 minutes, depending on the area being treated. Most people need 4-6 treatments to see noticeable results. In some cases, your doctor may recommend combining microneedling with platelet-rich plasma (PRP). PRP is created by spinning a sample of your own blood to concentrate the platelets and transforming growth factors in it. This solution is then applied to the skin in combination with the microneedling process for enhanced results, often referred to as a “Vampire Facial.”

The feeling of a microneedling treatment can be described as a “scratchy” or “prickly” sensation. Some patients feel it more than others, but for most, the discomfort is tolerable. Your skin will probably be red for 1 to 2 days after the procedure, but this can be helped by applying ice packs and taking over-the-counter NSAIDs if needed.

How Does Microneedling Work?

As the name implies, microneedling involves using tiny needles to penetrate your skin. Typically, your dermatologist will smooth numbing cream on your face before starting the treatment, so you won’t feel the pricks of the needles. Then, the dermatologist will move a pen-shaped or rolling tool that has needles on it around your face. The doctor will make small cuts into the surface of your skin with the needles, which causes a little bit of bleeding. This starts your body’s healing process. It sends collagen and elastin to the area of your face where you got the treatment so it can patch up those little injuries. The process also helps make your skin smoother and younger-looking.

The treatment can take anywhere from 60 to 90 minutes. Afterward, you will need to protect the treated area from sunlight and avoid scrubbing or using harsh soaps. It’s also important to not use any products on the face that contain retinol or Retin-A for at least 7 days after treatment. You should also wait to shave the treated area until after the first few days.

Although microneedling originated as a way to reduce scars, it’s becoming more popular as a beauty treatment that keeps skin plump and erases fine lines and wrinkles. It also reduces stretch marks and helps fade acne scars. It’s used by plastic surgeons, laser specialists and other medical professionals. The procedure can be done at a spa or dermatology clinic, but it’s best to go to a board-certified dermatologist to get the most dramatic and long-lasting results.

Microneedling is effective for most types of scars, including burn scars, surgical scars and ice pick scars. It’s also effective for reducing fine lines and wrinkles, improving the appearance of pores, fading uneven discoloration, and reducing sun damage.

A few weeks after your treatment, you should notice that your skin is smoother and brighter. As your body produces more collagen and elastin, it will repair the tiny wounds from the microneedling procedure, leaving you with more beautiful, younger-looking skin.

What Are the Benefits of Microneedling?

In addition to helping with fine lines and wrinkles, microneedling is effective at reducing the appearance of scars. According to a study published in the July-August 2016 issue of Indian Dermatology Online Journal, the needles can break down hardened scar tissue and encourage your body to rebuild healthy tissue. It also can minimize stretch marks.

After a numbing cream is smoothed over your face, the practitioner will move a pen-shaped or rolling tool with tiny needles over your skin. The needles make small cuts in your skin, and you may experience some bleeding. Once the needles have penetrated the top layer of your skin, they will stimulate your body to send collagen and elastin to patch up the holes. This helps reduce fine lines and wrinkles, stretch marks, and uneven skin tone.

Another benefit of microneedling is that it can help you look younger by tightening your pores and increasing the elasticity of your skin. As you get older, your body’s natural production of collagen begins to slow down. This can result in sagging skin and a dull appearance. Microneedling helps stimulate collagen production, which can improve your skin’s elasticity and give it a fresher, younger appearance.

Microneedling is also effective at reducing discoloration caused by sun damage. The small wounds created by the needles stimulate your skin to produce collagen, which can help reduce brown spots and other types of discoloration. The treatment can also be used in conjunction with platelet-rich plasma (PRP) to further improve your results.

Finally, microneedling can be used to treat acne and other types of scars. The tiny injuries from the needles stimulate your skin to create new tissue, which can help reduce or even eliminate acne scars and other types of scars. It is important to note that microneedling is not a magic bullet and will likely require multiple treatments before you see significant results.

Although microneedling is safe, it is important to visit a reputable dermatologist to ensure that you are getting the best results possible. Your doctor can recommend the right treatment plan for your goals and address any questions or concerns you have.

What are the Side Effects of Microneedling?

Some people may experience redness or mild irritation for a few days following microneedling, but that’s to be expected of any treatment causing inflammation. During this time, experts recommend you avoid retinols or retinoids and alpha and beta hydroxy acids (like glycolic acid), as these can irritate your skin. Also, avoid shaving and sweating until the sensitivity resolves—that typically happens within 3-7 days. You should also delay chemical peels until 30 days after your treatment, as these can aggravate the skin.

But the benefits of microneedling are significant, particularly if you’re dealing with acne scars, fine lines and wrinkles, or uneven tone and texture. The micro-trauma caused by the needles stimulates collagen production, which can minimize indented acne scarring, reduce fine lines and wrinkles, and even out skin tone and texture. Plus, the collagen-producing process can help reduce pores and tighten skin.

The experts note that while a single microneedling treatment can produce noticeable results, it’s best to have a series of treatments to really notice a difference. That’s because the process can take time to work—the body is working hard to regenerate new tissue, after all! But if you’re patient and stick with it, the experts say the results are worth it.

If you’re considering microneedling, it’s important to find a board-certified dermatologist who can perform the procedure safely and effectively. “Microneedling is a safe procedure for most people, but it’s important to make sure the treatment is performed in a clean, sterile environment by someone who knows what they’re doing,” Dr. Rablach explains.

Your dermatologist will start by washing your face and applying a numbing cream to the area that will be treated. Once the area is numb, the dermatologist will move a pen-shaped or rolling tool with small needles around your face—you’ll feel the pricks as they happen, but it shouldn’t be painful. The dermatologist will usually go over the same areas multiple times to ensure that they’re fully penetrated. The treatment lasts about 20-30 minutes. Afterward, you’ll likely need to avoid the sun for a few days. And if you’re pregnant, you should get clearance from your obstetrician or gynecologist before getting the treatment.

The Humvee – The Symbol of Modern US Military Conflict

The Humvee, also known as the HMMWV, has become one of the iconic symbols of modern US military conflict. It is a rugged vehicle that was designed to be air-dropped from aircraft, and could be easily modified for different missions.

After the attacks in Iraq, the Pentagon has accelerated production rates for up-armored Humvees. Civilians are allowed to purchase Humvees through military surplus auction companies, but they must meet your state’s inspection and titling requirements before driving it on the road. Contact Custom Humvee now!

The US Army wanted a new vehicle that would be easily manoeuvrable, transport people and cargo in the same way as jeeps, and allow for the mounting of various weapons systems. The result was the High Mobility Multipurpose Wheeled Vehicle, or HMMWV. It offered road and cross-country mobility, and its design pushed load-carrying capacity and agility to the limits. The basic vehicle did not offer any armor protection, however, since the military desired to maintain low empty weight.

Nicknamed the Humvee, the HMMWV proved an extremely versatile vehicle during the Gulf War and beyond. It has fought in deserts and jungles, evaded detection in hostile environments, ridden inside the belly of helicopters and jumped entire continents in transport aircraft.

During the Iraq conflict, the Humvee was called upon to perform a much different role than originally anticipated. It was no longer responsible for whisking service members across vast expanses of sand; instead, it was an urban taxi in some of the world’s most dangerous neighborhoods. And its soft aluminum body might as well have been tissue paper in the face of small arms fire, rocket-propelled grenades and roadside bombs.

To deal with these threats, the US military rushed to upgrade many of its Humvees, replacing some of their armor. At the same time, it pursued a crash program to develop vehicles that could protect crews while remaining lightweight and agile enough to handle the fast-paced movements of a high-tech war.

The resulting Humvees are a mixture of commercial off-the-shelf vehicles such as the Mine Resistant Ambush Protected (MRAP) and new designs that have been built from the ground up. The MRAPs are being used in short term replacement initiatives, while the Joint Light Tactical Vehicle is being developed as the long-term successor to the Humvee. In the meantime, several manufacturers are offering up-armored versions of the Humvee that could prove useful in the current conflict. Some of these designs offer the added bonus of being resistant to electromagnetic pulse (EMP), which could be a significant threat in an electronic warfare environment. The Humvee may also experience a 21st century rebirth as an unmanned vehicle, with several programs developing technologies that could make it feasible to convert the vehicles into highly mobile scout vehicles for troops at the forefront of battle.

Development

The Humvee entered the world of military vehicles in the early 1980s when the Pentagon awarded a production contract worth more than $1 billion to AM General Corporation to develop 55,000 High Mobility Multipurpose Wheeled Vehicles (HMMWV). Nicknamed the Humvee, these wide, rugged vehicles entered the spotlight after being used by the American military during the 1989 invasion of Panama and the Persian Gulf War in the early 1990s.

While the Humvee has served its purpose, it’s starting to show its age. In fact, the military is looking for a replacement to this aging workhorse. It’s not because the Humvee can’t do its job anymore, but because the military wants a new ride that can better withstand roadside bombs.

To help with this, the University of North Dakota has been awarded a $5 million contract from the Department of Defense to help develop an augmented reality system for Army ground vehicles. The system would allow soldiers in Humvees, aka the High Mobility Multipurpose Wheeled Vehicle or HMMWV, to view battlefield data as an AR heads-up display in their windshields.

Currently, the military uses a range of different systems to provide soldiers with information about their environment. Some are simple, like a head-up display that shows the vehicle’s speed and location. Others are more complex, like the Advanced Distributed Interactive Simulation (ADVIS) that provides a complete 3D representation of the vehicle’s surroundings to its operators.

Other systems help with intelligence collection, including sensors that detect mines and other threats. The military also has several options for additional protection, including turrets and armored hulls. However, these additional systems require a significant amount of time and money to develop, test, and produce.

So, it’s no surprise that the military is looking to reduce costs by finding ways to do more with less. And one way to do that is by making its vehicles more energy efficient. To this end, the military is working on an electric-powered Humvee.

The HUMVEE Charge hybrid-electric light tactical vehicle will use Commercial-Off-The-Shelf technology to integrate electric drive components into the Humvee. This will reduce fuel consumption and carbon emissions. It will also increase performance and acceleration while enabling the vehicle to operate in extreme conditions.

Production

For more than 30 years, the Humvee has represented the Army’s wheeled vehicles in combat. It’s big, boxy and designed to withstand a lot of punishment on the battlefield. Its origin dates back to 1979 when the military issued a draft specification for a new light utility vehicle. Chrysler Defense, Teledyne Continental and AM General submitted design proposals. The Army selected AM General’s model and it entered service in 1984, gaining fame after surviving the Gulf War and Operation Just Cause, the US invasion of Panama. The vehicle’s full name is the High Mobility Multipurpose Wheeled Vehicle, but soldiers began calling it the Humvee.

While the Humvee may look like a standard military vehicle from the outside, it’s actually designed to be highly customized and capable of operating in many different terrain types. The chassis is made from bonded aluminum panels that help the vehicle flex to handle driving on rough ground. The wheels are specially designed to be flexible, too. This allows the Humvee to go places a regular car can’t and to negotiate obstacles such as deep sand or rocky hills.

The vehicle’s original unarmored design proved vulnerable to improvised explosive devices during the Iraq War, leading the military to quickly up-armor some of the fleet and replace front-line vehicles with the Mine-Resistant Ambush Protected (MRAP). The MRAP has better armor and a V-shaped hull that deflects explosions away from the vehicle. The Army has also begun replacing Humvees with the Joint Light Tactical Vehicle, or JLTV.

The JLTV is smaller and lighter than the Humvee, but it’s also designed to be more customizable. It can be fitted with a variety of different seats and controls, and it can be equipped with various weapons, including mounted machine guns. The JLTV can even be outfitted with a wire command-guided anti-tank missile system. The JLTV was conceived to be a rapid deployment vehicle, and it’s possible to fit three in the C-130 Hercules transport aircraft and 15 in the Lockheed C-5A Galaxy. The Army can deploy these vehicles to troops on the ground in a matter of hours.

Variations

As the world’s military has fought in an increasingly unconventional way since the Cold War, new designs for light vehicle fleets have been called for. As a result, the Humvee has seen plenty of variations to suit various missions and roles. Some have even been customized with everything from machine guns to turrets and missiles. The Humvee’s design has proven so flexible that it continues to be a primary tactical vehicle today, over forty years after the first production models hit the road.

The Humvee was originally designed to replace the M151 Jeeps used by the US Armed Forces in the 1960s. While these vehicles were sturdy enough, they did not offer the protection needed to protect soldiers against Improvised Explosive Devices (IEDs) and Rocket Propelled Grenades (RPG).

The HMMWV’s independent front and rear suspension and bonded aluminum body allow it to handle rough terrain with ease. It also has advanced shock absorbers and torque-biasing differentials that help it to gain traction on terrain that would stop most four-wheel drives in their tracks. Disc brakes are mounted inboard, near the differentials, to keep them protected from debris and to improve off-road performance.

Its oversized tires, portal axles and wide track provide plenty of ground clearance, allowing the Humvee to drive over obstacles that could damage smaller cars. This includes improvised explosive devices (IEDs), mines and rocket-propelled grenades. The Humvee can carry a maximum payload of 2,500 pounds and seats 1+1 or 2+2 people depending on its configuration.

There are several different versions of the Humvee, including ambulances, cargo and troop carriers. However, all of them share a common chassis, engine and transmission. They also use 44 interchangeable parts to make maintenance and repairs easier. Some of the more popular variations include the H1 Humvee, the M109A8 heaviest-payload variant, and the M1151 up-armoured vehicle that offers IED blast protection.

The Humvee is a rugged and reliable vehicle, and it’s no wonder that it has lasted so long in the face of changing warfare tactics. It has conquered sand, rocks and snow. It has dragged trailers down the highway and ridden inside the belly of CH-53 helicopters. It has jumped whole continents in transport aircraft and endured the low-altitude air drop of the Low Altitude Parachute Extraction System. But like any vehicle, the Humvee needs to be maintained to continue working hard for its owners. That’s why Miles Fiberglass offers Humvee composite panel reinforcement kits to protect the hood from cracks and tears and make repairs faster.